4035 Cutter - Cutting Capacity (NFPA 1936)
|
4035 Cutter - Cutting Capacity (NFPA 1936)
|
| Material Category | A Round Bar |
B Flat Bar |
C Round Pipe |
D Square Tube |
E Angle Iron |
||||||
 |
 |
 |
 |
 |
|||||||
| Material | A-36 Hot-Rolled | A-36 | Schedule 40 A-53 Grade B | A-500 Grade B | A-36 | ||||||
| Performance Level | Diameter (in.) |
Thickness x Width (in. x in.) |
Nominal Size (in.) |
OD x Wall Thickness (in. x in.) |
Dimension x Wall Thickness (in. x in.) |
Square Dimension x Thickness (in. x in.) |
|||||
| 1 | 3/8 | 1/4 x 1/2 | 3/8 | 0.68 x 0.09 | 1/2 x 0.06 | 1/2 x 1/8 | |||||
| 2 | 1/2 | 1/4 x 1 | 3/4 | 1.05 x 0.11 | 1 3/4 x 0.06 | 1 x 1/8 | |||||
| 3 | 5/8 | 1/4 x 2 | 1 | 1.32 x 0.13 | 1 x 0.08 | 1 1/4 x 3/16 | |||||
| 4 | 3/4 | 1/4 x 3 | 1 1/4 | 1.66 x 0.14 | 1 1/4 x 0.12 | 1 1/2 x 3/16 | |||||
| 5 | 7/8 | 1/4 x 4 | 1 1/2 | 1.90 x 0.15 | 1 1/2 x 0.12 | 1 1/2 x 1/4 | |||||
| 6 | 1 | 3/8 x 3 | 2 | 2.38 x 0.15 | 1 3/4 x 0.12 | 1 3/4 x 1/4 | |||||
| 7 | 1 1/4 | 3/8 x 4 | 2 1/2 | 2.88 x 0.20 | 2 x 0.15 | 1 1/2 x 3/8 | |||||
| 8 | 1 1/2 | 3/8 x 5 | 3 | 3.50 x 0.22 | 2 1/2 x 0.19 | 2 x 3/8 | |||||
| 9 | 1 3/4 | 3/8 x 6 | 3 1/2 | 4.00 x 0.23 | 3 x 0.19 | 2 1/2 x 3/8 | |||||